Welcome to the PantoRouter Woodworking Machine Video Library!

This page contains general overview videos as well as various
How-To guides for making the most of your PantoRouter Woodworking Machine!


The webinar shows us cutting standard mortise and tenon, compound angles, plus a whole lot more. Whether you’re a PantoRouter Woodworking Machine owner or might like to be, the webinar should offer some tips and tricks to speed your workflow and help you to take your joinery to a whole new level!

Our second webinar with Fine Woodworking was a huge success and the recording is now available to view.


360° Rotating Clamps for the PantoRouter® - Universal air or lever clamps for the PantoRouter® secure your work faster and easier than ever before.

The PantoRouter™ makes quick work of the compound angles joining the stretchers to the legs of these three-legged stools. The plan for these stools can be purchased in our shop.


The PantoRouter joinery machine now has a 230 Volt 50/60 Hz router motor for use outside North America. This new router does not come with a base as it's intended to be used in the PantoRouter router mounts or in a router table.

In this video produced for the Guild of Oregon Woodworkers, we demonstrate simple Mortise and Tenon and compound angled M&T.


PantoRouter Core Skills Training Part 2 - Dovetails

The auxiliary table for the PantoRouter woodworking joinery jig make quick work of beveling a box top or creating decorative details.


Cutting angled mortise and tenon is fast and easy on the PantoRouter!

This video is intended to assist the new PantoRouter™ owner in dialing in the PantoRouter™ for peak performance.


Template Routing: The Pantorouter's Superpower Video by Darrell Peart

The slot mortise template makes single or double mortises of any size, and the set-up couldn't be easier. There's no math and your mortises can be straight, angled, or compound angled.


The new template holder makes changing templates fast and easy and the patent-pending centering system makes setup a breeze.

Box joints of any size can easily and quickly be made using this jig. We use a feature unique to the PantoRouter to dial in a perfect fitting index pin so you don’t need to make multiple cuts on the saw.


It takes only a few seconds to center the template on the PantoRouter template holder.

Here’s how!

Guide Bearing Collars make repeating mortise and tenon super fast and easy.

Making dovetails on the PantoRouter is fast, easy, and accurate.

We used Rockler vacuum pads to hold down the cutting boards we made so we could cut finger holds in the ends using a ball nose bit. We also used the dowel template to make ¾" walnut dowels for feet.


Our variably-spaced or fixed-space dovetail templates for the PantoRouter are now available. Use the same template for pins and tails and create either fixed-space or variably-spaced dovetails in minutes.

The Optimal Dust Collection Hose for the PantoRouter.

A Must-Have!


Our Australia reseller, Timbecon, produced this great video on making dovetails on the PantoRouter™. Be sure to subscribe to Patrick’s YouTube channel. He’s a wealth of information!

George Vondriska gives an overview of how the PantoRouter works. George shows mortise and tenon and talks about box joints and dovetails.